Irrigation Pipework and Fittings
Irrigation Pipework and Fittings are the mainframe for any hydroponic system as they are the primary method for delivering nutrient solutions to the growing area.
Pipework must be of a suitable pressure rating and be made of food grade PVC. They must also be sized appropriately to prevent friction loss or inadequate flow.
Each type of hydroponic system draws upon different types of pipework and fittings.
Examples of these are as follows:
Drip Fertigation Systems
- PVC Pressure Pipe (15mm, 20mm, 25mm, 32mm, 40mm, 50mm, 80mm etc)
- PVC Pressure Fittings (Elbows, Tees, Barrel Unions, Valve Sockets, Faucet Sockets etc)
- PVC Control Valves (2 Way & 3 way valves, Single Union Ball Valves, Double Union Ball Valves)
- LDPE & MDPE tubing + Valves & Fittings
- Lateral Tubing + Valves & Fittings
NFT Systems
- PVC Pressure Pipe (15mm, 20mm, 25mm, 32mm, 40mm, 50mm, 80mm etc)
- PVC Pressure Fittings (Elbows, Tees, Barrel Unions, Valve Sockets etc)
- PVC Control Valves (2 Way & 3 way valves, Single Union Ball Valves, Double Union Ball Valves)
- Drain, Waste & Vent Pipe (80mm, 90mm, 100mm, 150mm etc)
- Drain, Waste & Vent Fittings (Elbows, tees, service caps)
- Rain Guttering & Fittings (For Sliding Bench Catchment Systems) (Drainage Junctions, External Brackets, Stop Ends)
Pure Hydroponics can provide competitive export pricing for large or small orders.