Autogrow Intellidose (EC & pH Control) Kit Price NZ$3,015.00 + GST

The Autogrow IntelliDose sets the industry standard for small commercial auto-dosing.

It will automatically manage nutrient and pH levels, set remote alarms and data log progress with a nutrient dosing system.

Grower approved to over 15 years, the IntelliDose sets the industry standard for automatic nutrient dosing, allowing you to dose up to a 9-part blend (nutrients, additives, pH adjuster) while maintaining your preset EC and pH settings. Automatically manage your nutrient and pH levels, set remote alarms and data-log your progress with one simple controller. Achieve better results with a nutrient dosing system.

With an IntelliGrow subscription you get remote access, data logging, and text/email alerts. All units come with a 2 year warranty and unlimited tech support. Finally unshackle yourself from your reservoir!

EASE OF USE

The large, interactive screen allows you to easily maneuver between calibrating, set points, alarms and configuration. If you can program a number into a cell phone, you can program your IntelliDose.

RUN UP TO 4 IRRIGATION STATIONS

The IntelliDose can run up to 4 irrigation stations, allowing different areas of your grow space to be watered on different schedules. Use one reservoir or have a pump feed each station at different times. You can also set your system to only irrigate during the daytime.

PERISTALTIC PUMPS

Peristaltic pumps allow you to have all of your nutrient stock tanks on the ground, allowing for much larger quantities of pre-mixed solutions. This lowers the chance of leaks and spills, and will cut down on your labor. Autogrow’s peristaltic pumps are heavy duty, pumping 350ml/minute and can run any size reservoir (even over 1,000 gallons!) with ease.

TECHNICAL INFORMATION

  • 9 outputs 24VDC (or same voltage as supplied by plug pack)

  • Nutrient measurement units EC, CF or TDS (500/640/700)

  • Measured range 0.00 to 9.99EC, 0.1 to 99.99CF, 0 to 7000PPM

  • Nutrient resolution to .01mS/cm, 0.1CF

  • Nutrient measurement accuracy +/-0.1EC, 1.0CF or 10PPM (temperature compensated)

  • Nutrient dosing range 0.00 to 5.99EC, 0.1 to 59.9CF, 0 to 4200PPM

  • pH resolution and accuracy – 0.1pH

  • pH measurement range 2pH to 12pH

  • Nutrient and pH dosing times settable from 0 minutes to 254 minutes

  • Dosing interval settable from 0 minutes (continuous dosing) to 254 minutes

  • Sequential dosing to prevent power surges

  • Solution temperature accuracy 1°C/2°F

  • Temperature range 0-50°C/32-125°F

  • Operating temperature range 0-50°C/32-125°F (not in direct sunlight)

  • Power source – 120V/240V into 24VDC plug pack (supplied)

  • Dosing shut off:

  1. If nutrient is below 0.1EC, 1.0CF, 10PPM

  2. If pH is below 4.5 or above 8.0

  3. If nutrient is below 0.1EC/1CF/10PPM or above 6.0EC/60CF/6000PPM

IntelliDose Manual2020 IntelliDose Manual V5.6

IntelliDose Kit with EC & pH Probes, Power Supply Unit & Sample Pot (No Dosing Pumps) – NZ$2,138.50 + GST
IntelliDose Kit with EC & pH Probes, Power Supply Unit & Sample Pot, 3 x 300ml/Minute Peristaltic Dosing Pumps – NZ$3,015.00 + GST
IntelliLink w/PSU, USB and Ethernet Cables (For PC Interface and Data Logging) NZ$235.00 + GST

Please talk to Pure Hydroponics for more information.